AOC Craft Vietnam JSC

Sweet pop cards

AOC Craft Vietnam JSC
3D BIRTHDAY BANNER

3D BIRTHDAY BANNER

3D BIRTHDAY BANNER 

A long time ago, I pinned this beautiful cake I’d come across by Sarah at Signe Sugar. I loved it so much, it inspired me to create this paper banner version. I had no idea how to go about it, so I just jumped into cutting, bending and gluing. Once I got the hang of it, it came together pretty quickly. And, if you mess up, it’s just paper – –  so just cut another piece and keep moving forward!

3D Birthday Banner

3D Birthday Banner

3D Birthday Banner DIY | Oh Happy Day!3D Birthday Banner DIY | Oh Happy Day!3D Birthday Banner DIY | Oh Happy Day!

Materials:

  • Card stock or heavyweight paper
  • Ruler
  • Paper cutting knife
  • Bone folder
  • Scissors
  • Glue
  • String
  • Mini hole punch.

3D Birthday Banner DIY | Oh Happy Day!

Step 1: Begin by cutting several strips of 8″ x 3″ paper.  To create tall, narrow letters, keep the inside pieces small. For example, for the “H,” begin with two 8″ x 3″ strips, and cut a 2″ x 3″ piece for the inside center piece.

Step 2: Draw a line of glue on the 3″ side of the small center piece.

Step 3: Attach it at a 90 degree angle to one 8″ x 3″ piece, about 2″ down from the top. Hold for a few seconds until the glue sets.

Step 4: Draw a thin line of glue on the top of the 3″ center piece, and gently attach another 8″ x 3″ strip, matching the first 8″ x 3″ strip. Continue in this way for the H, A, Y, I, T, H, A, and Y.

3D Birthday Banner DIY | Oh Happy Day!

Step 5: For letters that have curves, begin with your 8″ x 3″ strip. For the “P,” take a second strip approx. 7″ x 3″ and, with your bone folder, gently score a crease 1/2″ from the top. Fold gently 90 degrees. Flip this strip over and score 1/2″ down from the other end.

Step 6: Apply glue to the top of the creased strip.

Step 7: Glue the creased strip to the outside top of the flat 8″ x 3″ strip.

Step 8: Apply glue to the inside of the second creased 1/2″ fold. Gently bend the “P” shape and attach to the 8″ x 3″ strip about 3 1/2″ inches from the top of the letter. Press and hold for a few seconds. Continue in this way with the B, R, and D.

Step 9: Punch holes 1/2″ down from the FRONT top of each letter, on both left and right sides of the letter.

Step 10: Punch holes 1/2″ down from the BACK top of each letter, on both left and right sides of the letter.

Step 11: Line up your letters and thread string through each FRONT top hole of every letter.

Step 12: Thread string through each BACK top hole of every letter.

Step 13: Carefully hang the banner, adjusting the letters and the string to get the right tension and placement of the letters. Enjoy!

3D Birthday Banner DIY | Oh Happy Day!3D Birthday Banner DIY | Oh Happy Day!

DIY POP UP CARDS

DIY POP UP CARDS

I’ve been seeing a lot of pop-up cards around the web lately, all using very intricate, sometimes complicated folding and glueing techniques. Since I’m really more of the simple-diy-lover, I’ve put together a quick and versatile pop-up card tutorial. The idea is that you can use one basic technique for an endless amount of different pop-up cards.

Start with a simple card and fold it in half. Then cut parallel lines (in pairs of the same length) into the middle fold as shown in the picture. The cuts should be max half the length of the card (otherwise they’ll stand out when you close it). Push the flaps forward until your card looks like in the bottom picture.

Now start crafting the bits and pieces to display in your card. I made some balloons and a Good Luck sign for this one. Stick these with paper glue onto the front (not top) part of the folded out flaps. Now when you close your card, it’ll look like in the bottom left picture. Just take a 2nd card and glue it on to cover the outside.

Stick some more balloons, or whatever it is you’re crafting, onto the flaps and voilà – you’re done. You could still add a background to the top and bottom halves. Stick on some clouds in the top part, some grass in the lower one for example.

In the same way you can also create text cards (Happy Birthday), fields of flowers or rows of trees. These would be great for birthday’s, graduation, Father’s Day or really just about anything.

All photos by Michaela for Oh Happy Day.

Via at http://ohhappyday.com