AOC Craft Vietnam JSC

Sweet pop cards

AOC Craft Vietnam JSC
3D BIRTHDAY BANNER

3D BIRTHDAY BANNER

3D BIRTHDAY BANNER 

A long time ago, I pinned this beautiful cake I’d come across by Sarah at Signe Sugar. I loved it so much, it inspired me to create this paper banner version. I had no idea how to go about it, so I just jumped into cutting, bending and gluing. Once I got the hang of it, it came together pretty quickly. And, if you mess up, it’s just paper – –  so just cut another piece and keep moving forward!

3D Birthday Banner

3D Birthday Banner

3D Birthday Banner DIY | Oh Happy Day!3D Birthday Banner DIY | Oh Happy Day!3D Birthday Banner DIY | Oh Happy Day!

Materials:

  • Card stock or heavyweight paper
  • Ruler
  • Paper cutting knife
  • Bone folder
  • Scissors
  • Glue
  • String
  • Mini hole punch.

3D Birthday Banner DIY | Oh Happy Day!

Step 1: Begin by cutting several strips of 8″ x 3″ paper.  To create tall, narrow letters, keep the inside pieces small. For example, for the “H,” begin with two 8″ x 3″ strips, and cut a 2″ x 3″ piece for the inside center piece.

Step 2: Draw a line of glue on the 3″ side of the small center piece.

Step 3: Attach it at a 90 degree angle to one 8″ x 3″ piece, about 2″ down from the top. Hold for a few seconds until the glue sets.

Step 4: Draw a thin line of glue on the top of the 3″ center piece, and gently attach another 8″ x 3″ strip, matching the first 8″ x 3″ strip. Continue in this way for the H, A, Y, I, T, H, A, and Y.

3D Birthday Banner DIY | Oh Happy Day!

Step 5: For letters that have curves, begin with your 8″ x 3″ strip. For the “P,” take a second strip approx. 7″ x 3″ and, with your bone folder, gently score a crease 1/2″ from the top. Fold gently 90 degrees. Flip this strip over and score 1/2″ down from the other end.

Step 6: Apply glue to the top of the creased strip.

Step 7: Glue the creased strip to the outside top of the flat 8″ x 3″ strip.

Step 8: Apply glue to the inside of the second creased 1/2″ fold. Gently bend the “P” shape and attach to the 8″ x 3″ strip about 3 1/2″ inches from the top of the letter. Press and hold for a few seconds. Continue in this way with the B, R, and D.

Step 9: Punch holes 1/2″ down from the FRONT top of each letter, on both left and right sides of the letter.

Step 10: Punch holes 1/2″ down from the BACK top of each letter, on both left and right sides of the letter.

Step 11: Line up your letters and thread string through each FRONT top hole of every letter.

Step 12: Thread string through each BACK top hole of every letter.

Step 13: Carefully hang the banner, adjusting the letters and the string to get the right tension and placement of the letters. Enjoy!

3D Birthday Banner DIY | Oh Happy Day!3D Birthday Banner DIY | Oh Happy Day!

Ideas for Valentine’s Day Window Cards

Ideas for Window Valentine’s Day Cards

A slight variation from stencil cards is window cards.  Instead of cutting a shape in a stencil, you can cut the shapes or text directly on the front cover of the Valentine’s Day cards.  You can decorate your card behind the mirror in a number of ways, such as putting sentimental photos, some patterned paper, or even some meaningful words.  We made a variety of window cards with different shapes and patterns.  Here’s a look at the cards we made:

Ideas for Valentine’s Day Window Cards

Ideas for Window Valentine’s Day Cards

[dt_sc_one_third first]Ideas for Valentine’s Day Window Cards[/dt_sc_one_third]
[dt_sc_one_third]Ideas for Valentine’s Day Window Cards[/dt_sc_one_third]
[dt_sc_one_third]Ideas for Valentine’s Day Window Cards[/dt_sc_one_third]

The cards in the top row have heart windows that we filled with pictures of our baby daughter. The bottom row has simple elegant rose cut out windows.

These are the 3 simple instructions on how to make window Valentine’s Day cards.

Step 1:

Draw the heart shapes on the front of the card using a pencil (draw lightly as you will need to erase any pencil marks that remains after cutting).  You can also use stencils to draw your heart. 

Follow the first step of the instructions in the Stencil Card section above to make your own stencil.  You can also draw other shapes such as flowers, balloons or square windows.  If you do not want to draw directly on your card, draw your pattern on a sheet of paper, and use this as a template to cut through your card. 

Tape or use repositionable glue to attach the template to your card.

Step 2:

If your pattern is large enough, you can use scissors to cut the window out.  If your pattern is small or complex, then you will want to use an X-Acto knife to cut the shapes out.  I’d recommend cutting your card on a self-healing mat or something you don’t mind cutting up (old magazine, stack of paper, phone book), so you do not damage your table top.

Step 3:

Finish the card by decorating the card behind the window.  Here are some creative ideas of things to put behind the window:  a photo; patterned paper, text, stenciled shapes, chocolate hearts or kisses.

Ideas for Valentine’s Day Stencil Cards

Using stencils is a great way to create hearts on the front of your card.  There are two general ways to use stencils.  You can cut a hole and color inside the hole, or cut a shape and color around the shape.  You can be very creative with the way you color inside or around your stencil.  You can use almost any media such as spray paint, spray inks, markers, pastels, acrylics, watercolor, glitter…the possibilities are endless!  Try experimenting on some scrap paper to see which media you like best.  We had some fun making cards with stencils.  We made the cards below using stencils and spray paint.

 

 

We also used acrylic paint and stencils for a very simple brushed look.

   

Using a stencil heart, we created the cards below with a marker (left) and glue and glitter (right).

  

Here are instructions on how to use stencil techniques to decorate your Valentine’s Day card.

1. Create a stencil by cutting out your desired shapes in a piece of paper or card stock.  To make hearts, fold your cardstock or paper in half and cut half a heart along the crease.  Now you can use the heart hole or the heart itself as a stencil.  If you’re using the heart hole as a stencil, then make sure that the entire stencil is larger than your card so you don’t get any of your colors where you don’t want them to be.  I find that using a paper stencil works better than cardboard.

2. This step is optional but I find it helpful.  Use repositionable glue or spray (Krylon Easy Tact Spray) to attach the stencil to your card.  This helps prevent colors from getting underneath your stencil, especially if you use a spray paint.  You can also use some double-sided tape, but you want to be very careful not to tear your card while removing the stencil.  To reduce the stickiness of the tape, I sometimes stick it to my clothes to get some lint stuck on it first.

3. Use your chosen media to color inside or around your stencil.  Make sure you do not color underneath your stencil.  This may take some practice to get the perfect look.  You can even try to mix different media: acrylic and glitter, spray paint and pastel…etc.  You can even use both the window or shape stencil together with different sized hearts.

Here are other examples of stencil cards using acrylic paint from Bless This Mess and spray inks from Artful Kids.  The Crafty Crow used a very unique technique with Q-tips and stencils to make a Valentine’s day card.

Via at http://www.creativepopupcards.com

Draw pattern sweet home pop up card in corel draw

Draw pattern sweet home pop up card in corel draw

For more tutorials, videos or patterns, please follow and check out website at http://aoccraft.com/
Our website supply information about the cutting art, wood or paper cutting, free patterns or tutorials for DIY wood/paper cutting. Besides, you can find some articals for design with graphic software (as Coreldraw, photoshop, sketchup, blender….)

DOWNLOAD PATTERN CLICK HERE
—————————————-­—–
AOC Craft
Website: http://aocraft.com
Facebook: https://fb.com/artofcutting
Pinterest: https://www.pinterest.com/thecuttingart/